An attempt to synthesize Sn-Zn-Cu alloy nanoparticles
نویسندگان
چکیده
منابع مشابه
(Zn,H)-codoped copper oxide nanoparticles via pulsed laser ablation on Cu-Zn alloy in water
Nanosized (5 to 10 nm) amorphous and crystalline nanocondensates, i.e., metallic α-phase of Zn-Cu alloy in face-centered cubic structure and (Zn,H)-codoped cuprite (Cu2O) with high-pressure-favored close-packed sublattice, were formed by pulsed laser ablation on bulk Cu65Zn35 in water and characterized by X-ray/electron diffractions and optical spectroscopy. The as-fabricated hybrid nanocondens...
متن کاملEthylene binding to Au/Cu alloy nanoparticles
a Materials Science and Engineering Program, The University of Texas at Austin, Austin, TX 78712, United States b Department of Chemistry and the Institute for Computational Engineering and Sciences, The University of Texas at Austin, Austin, TX 78712, United States c Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, TX 78712, United States d Departme...
متن کاملNon-conductive film with Zn-nanoparticles (Zn-NCF) for 40 μm pitch Cu-pillar/Sn-Ag bump interconnection
Non-conductive film with Zn nano-particles (Zn-NCF) is an effective solution for fine-pitch Cu-pillar/Sn– Ag bump interconnection in terms of manufacturing process and interfacial reliability. In this study, NCFs with Zn nano-particles of different acidity, viscosity, and curing speed were formulated and diffused Zn contents in the Cu pillar/Sn–Ag bumps were measured after 3D TSV chip-stack bon...
متن کاملSynthesis of Cu, Zn and Cu/Zn brass alloy nanoparticles from metal amidinate precursors in ionic liquids or propylene carbonate with relevance to methanol synthesis.
Microwave-induced decomposition of the transition metal amidinates {[Me(C(N(i)Pr)2)]Cu}2 (1) and [Me(C(N(i)Pr)2)]2Zn (2) in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) or in propylene carbonate (PC) gives copper and zinc nanoparticles which are stable in the absence of capping ligands (surfactants) for more than six weeks. Co-decomposition of 1 and 2 yields the ...
متن کاملINTERACTIONS OF Cu-SUBSTRATES WITH TITANIUM-ALLOYED Sn-Zn SOLDERS
The interactions of copper substrate with titanium-alloyed Sn-Zn eutectic solders have been studied. Two series of experiments have been performed. The first one consisted in differential thermal analyses of Sn-Zn nearly eutectic alloys containing from 1.3 to 2.2 wt. % Ti. Diffusion couples consisted of Cu-wires and Sn-Zn-Ti liquid solders, produced at 250 and 275 OC have been prepared in the s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Letters
سال: 2016
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2016.04.192