An automated inverse method to calibrate thermal finite element models for numerical welding applications

Inverse vibration problems for finite-element models

The direct problem of free vibration analysis via finite-element formulation is well known: the element mass and stiffness matrices are assembled to form the system mass and stiffness matrices; the problem is reduced to standard eigenvalue form; the eigenvalues and eigenvectors are found. The paper discusses some inverse problems relating to finite-element formulations for simple chain-like str...

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results

This paper presents a new super-element with twelve degrees of freedom for latticed columns. This elements is developed such that it behaves, with an acceptable approximation, in the same manner as a reference model does. The reference model is constructed by using many Solid elements. The cross section area, moments of inertia, shear coefficient and torsoinal rigidity of the developed new elem...

Development of a Finite Element Methodology for Flexible Track Models in Railway Dynamics Applications

The dynamic analysis of railway vehicles involves the construction of three independent models: the vehicle model; the track model; and the wheel-rail contact model. In this work, a multibody formulation with Cartesian coordinates is used to describe the kinematic structure of the rigid bodies and joints that constitute the vehicle model. A methodology is also proposed in order to create detail...

Validation of an Automated Method for Generating Subject-Specific Finite Element Models of the Lumbar Spine