An Automatic Offset Calibration Method for Differential Charge-Based Capacitance Measurement
نویسندگان
چکیده
Charge-Based Capacitance Measurement (CBCM) technique is a simple but effective for measuring capacitance values down to the attofarad level. However, when adopted fully on-chip implementation, this suffers output offset caused by mismatches and process variations. This paper introduces novel method that compensates of integrated differential CBCM electronic front-end. After detailed theoretical analysis topology, we present discuss modified architecture increases robustness against The proposed circuit has been simulated using standard 130-nm technology shows sensitivity 1.3 mV/aF 20× reduction deviation voltage as compared traditional solution.
منابع مشابه
Automatic Robot Joint Offset Calibration
A contact-based calibration technique using a robot-mounted calibration probe, has been experimented with. The probe is to be implemented by utilizing a wrist-mounted force sensor. The technique is based on constraining the sampled robot joint poses to those where the probe end is in controlled contact with a planar surface. The paper illustrates how the technique may be used to achieve a joint...
متن کاملMeasurement and calibration method for an optical encoder based on adaptive differential evolution-Fourier neural networks
A high-precision measurement and calibration device is proposed in this paper. The resolution of this device can reach 18 binary bits, and it can measure whether or not optical encoders reach their nominal accuracy. The method based on the adaptive differential evolution-Fourier neural network (ADE-FNN) is proposed to improve the accuracy of optical encoders. This method makes full use of the F...
متن کاملInvestigation of Interconnect Capacitance Characterization using Charge-Based Capacitance Measurement (CBCM) Technique and 3-D Simulation
This paper examines the recently introduced Charge-Based Capacitance Measurement (CBCM) technique through use of a 3-D interconnect simulator. This method can be used in conjunction with simulation at early process development stages to provide designers with accurate parasitic interconnect capacitances. Metal to substrate, interwire, and interlayer capacitances are each discussed and overall c...
متن کاملInvestigation of Interconnect Capacitance Characterization Using Charge-Based Capacitance Measurement (CBCM) Technique and Three-Dimensional Simulation
This paper examines the recently introduced chargebased capacitance measurement (CBCM) technique through use of a three-dimensional (3-D) interconnect simulator. This method can be used in conjunction with simulation at early process development stages to provide designers with accurate parasitic interconnect capacitances. Metal to substrate, interwire, and interlayer capacitances are each disc...
متن کاملAn Approximation Method for Fuzzy Fixed-Charge Transportation Problem
In this paper, we develop the fuzzy fixed charge transportation problem when the costs are the fuzzy numbers. The first step it transform into the classical fuzzy transportation problem. The next, we obtain the best approximation fuzzy on the optimal value of the fuzzy fixed-charge transportation problem. This method obtains a lower and upper bounds both on the fuzzy optimal value of the fuzzy ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Low Power Electronics and Applications
سال: 2021
ISSN: ['2079-9268']
DOI: https://doi.org/10.3390/jlpea11020022