An electrodeposited Ni-P-WS2 coating with combined super-hydrophobicity and self-lubricating properties
نویسندگان
چکیده
منابع مشابه
The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress
The nickel-manganese (Ni-Mn) alloy coating prepared from DC electrodeposition process in sulphamate bath was studied. The effects of process parameters, such as current density and electrolyte composition, on the cathodic current efficiency, microstructure, internal stress and mechanical properties were investigated. Because of its crucial effect on the application to the electroforming of micr...
متن کاملمقایسه فوق آب‌گریزی و رفتار خوردگی پوشش‌های میکرو- نانو ساختار نیکل و نیکل- کبالت بر روی زیرلایه مس
Super-hydrophobic nickel and nickel-cobalt alloy coatings with micro-nano structure were successfully electrodeposited on copper substrates with one and two steps electrodeposition. Surface morphology, wettability and corrosion resistance were characterized by scanning electron microscopy, water contact angle measurements, electrochemical impedanc spectroscopy (EIS) and potentiodynamic...
متن کاملWear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating
Ni-W coatings, compared to pure nanocrystalline Ni, exhibit higher hardness and wear resistance. In some cases, these coatings are considered as environmental friendly alternatives for hard chromium coating. Till now, most of Ni-W coatings have been produced by direct current electrodeposition from alkaline baths. In this study square pulse current was used for deposition of Ni-W precipitates f...
متن کاملMechanical properties of reticulated aluminum foams with electrodeposited Ni–W coatings
The struts of reticulated aluminum foams were coated with nanocrystalline Ni–W by electrodeposition. The thickness and composition of these high-strength coatings are controlled by varying the bath chemistry, applied current conditions and deposition time. Despite an increase in density as compared to the uncoated foams, the coated foams exhibit improvements in both absolute and specific streng...
متن کاملAn Experimental Approach for Optimizing Coating Parameters of Electroless Ni-P-Cu Coating Using Artificial Bee Colony Algorithm
This paper aims to present an experimental investigation for optimum tribological behavior (wear depth and coefficient of friction) of electroless Ni-P-Cu coatings based on four process parameters using artificial bee colony algorithm. Experiments are carried out by utilizing the combination of three coating process parameters, namely, nickel sulphate, sodium hypophosphite, and copper sulphate,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electrochimica Acta
سال: 2017
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2017.05.166