An experimental investigation on mode-I fracture toughness of mussel shell/epoxy particle reinforced composites
نویسندگان
چکیده
منابع مشابه
Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
1.1 This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite materials using the double cantilever beam (DCB) specimen (Fig. 1). 1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber and glass fiber tape laminates with brittle and tough single-phase polymer matrice...
متن کاملPrediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملNon-smooth mode I fracture of fibre-reinforced composites: an experimental, numerical and analytical study.
We present a novel approach to analyse the fracture of fibre-reinforced composites. Experimental results on mode I fracture of glass fibre and carbon fibre unidirectional laminates presented here and published by others in the open literature formed the basis for the analytical and numerical results presented. When details of the external loading rate are explicitly accounted for, a new picture...
متن کاملStatistical Investigation of Parameters Influence on Fracture Toughness of the Glass Fiber Reinforced Composites
The objective of the work was to investigate statistical analysis of fracture toughness of the glass fiber reinforced composites at different stacking sequences, strain rate and crack length. The glass reinforced vinylester composites prepared by hand layup technique with stacking sequences of 0/90, 45/-45 and chopped strand orientations. 3point bending for fracture toughness test for various n...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pamukkale University Journal of Engineering Sciences
سال: 2020
ISSN: 1300-7009
DOI: 10.5505/pajes.2019.46690