An experimental Study of Kevlar/epoxy Composite cylinders under internal pressure loading
نویسندگان
چکیده
منابع مشابه
Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
متن کاملParametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure
This study investigates the buckling behavior of short cylindrical shells with hemi-spherical heads subjected to hydrostatic pressure. It is assumed that the length of the cylindrical part is smaller than or equal to its diameter while its material may be dif-ferent from that of hemispherical heads. Finite element analysis was used to seek out the effect of geometric parameters such as thicknes...
متن کاملExperimental Testing of Composite Rings under Uniform External Hydrostatic Pressure
The results obtained from the experimental testing of hoop wound S-2 GlasdEpoxy and AS41 PPS composite rings are presented here. In this study, the effects of different material system and thickness on failure are investigated. A custom, volume controlled pressurization set-up was designed and built for the tests. Initial imperfection in the ring specimens were measured prior to testing and the...
متن کاملexperimental study on double-walled copper and carbon/epoxy composite tubes under the axial loading
this paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
متن کاملPressure Loading of Piezo Composite Unimorphs
Over the past decade synthetic jets have emerged as a promising means of active flow control. They have the ability to introduce small amounts of energy locally to achieve non-local changes in the flow field. These devices have the potential of saving millions of dollars by increasing the efficiency and simplifying fluid related systems. A synthetic jet actuator consists of a cavity with an osc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AL-Rafdain Engineering Journal (AREJ)
سال: 2015
ISSN: 2220-1270
DOI: 10.33899/rengj.2015.101570