An Experimental Study on Pervious Concrete
نویسندگان
چکیده
منابع مشابه
Experimental Study on Mechanical and Hydrological Properties of Pervious Concrete with Different Water Cement Ratio
The aim of this research was to study the effect of various water-to-cement ratio on the properties of pervious concrete. Tests were carried out to find the optimum water-to-cement ratio that gives a high compressive strength with acceptable permeability. The tests of fresh density, compressive strength at 7days, porosity and water permeability for four mixes of pervious concrete with various w...
متن کاملVirtual Pervious Concrete: Microstructure, Percolation, and Permeability
As the usage of pervious concrete continues to increase dramatically, a better understanding of the linkages between microstructure, transport properties, and durability will assist suppliers in mixture proportioning and design. This paper presents various virtual pervious concrete microstructural models and compares their percolation characteristics and computed transport properties to those o...
متن کاملAn Experimental and Analytical Study on Alccofine Based High Strength Concrete
The use of supplementary cementitious materials (SCMs) in concrete manufacturing is considered as financial, technical and environmental benefit. In this regard, this paper presents the experimental and analytical study of high strength concrete (HSC) with alccofine-1203 (alccofine) and fly ash as partial replacements to cement. A total of seven mixes were prepared with different percentages of...
متن کاملThe Use of Seashell by-Products in Pervious Concrete Pavers
Pervious concrete is a green alternative to conventional pavements with minimal fine aggregate and a high void content. Pervious concrete allows water to infiltrate through the pavement, thereby reducing the runoff and the requirement for stormwater management systems. Seashell By-Products (SBP) are produced in an important quantity in France and are considered as waste. This work investigated ...
متن کاملMicromechanical modeling of fiber reinforced pervious concrete composites
Pervious concrete is widely used in today’s construction industry, e.g.. parking lots, airport runways, etc. However, the durability and strength of the porous concrete remains a challenge, as the binding material proportion is low and the use of fi ne aggregates is nearly 0. Increasing the compressive load, the failure appears fi rst in the weak concrete zone induced by the random distribution...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Research Journal of Multidisciplinary Technovation
سال: 2019
ISSN: 2582-1040
DOI: 10.34256/irjmtcon24