An Experimental Study on the Thermal Stability of Mg2Si/Ni Interface under Thermal Cycling
نویسندگان
چکیده
منابع مشابه
An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
Fracture analysis of glass/epoxy composites under different thermal cycling conditions is considered. Temperature difference, stacking sequence, fiber volume fraction and number of thermal cycles are selected as the experimental design factors. The Taguchi method is implemented to design of the experiment and an apparatus is developed for automatic thermal cycling tests. The tensile tests are d...
متن کاملAn Experimental Study of the Effect of Amines on Polymer Efficiency and Thermal Stability of Water-based Drilling Fluid
Amine compounds are believed to have acceptable results regarding their use as clay swelling inhibitor and corrosion inhibitor additives in drilling fluids. It is crucial to know the capability of amine compounds to enhance the thermal stability of drilling fluid; herein, a water-based fluid composed of biopolymer and other additives as the proper representatives of muds used in the pay zone se...
متن کاملAn Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE)
[if gte mso 9]> In the present work, the thermal conductivity coefficients of nanoparticle-oil suspensions for two types of carbon nanotubes, single-walled (SWNTs) and multi-walled (MWNTs) carbon nanotubes at 0.1, 0.2 and 0.3 wt.% were measured by a modified transient hot wire method (KD2-pro thermal property meter). Results showed that the thermal conductivity of suspension containing single-...
متن کاملBénard-Marangoni thermal oscillators: An experimental study
An experimental study of time-dependent Bénard-Marangoni convection in small aspect ratio containers and high Prandtl number fluids is presented. Two similar systems with the same aspect ratio, depth, and type of fluid are compared: one with adiabatic lateral boundaries and the other with open boundaries. In spite of the fact that very different plan forms and flows appear, both systems exhibit...
متن کاملSurface Degradation of Polymer Matrix Composites Under Different Low Thermal Cycling Conditions
The principal effects of mass degradation on polymer matrix composites (PMCs) are the decay of mechanical properties such as strength, elongation, and resilience. This degradation is a common problem of the PMCs under thermal cycling conditions. In this article, composite degradation was investigated by measurement of total mass loss (TML) using the Taguchi approach. Thermal cycling tests were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13143117