An Interface Model Including Cracks and Roughness Applied to Masonry
نویسندگان
چکیده
منابع مشابه
An Overview of Interface Cracks
In many cases cracks leading to fracture occur at interfaces between two different constituents, e.g. a fiber and the matrix in a composite. The early solutions of such problems in the context of linear elastic fracture mechanics (LEFM) revealed the presence of an unsatisfactory behavior: rapid oscillations in the stress and displacement fields, implying the physically impossible phenomenon of ...
متن کاملInterface Cracks
-Properties of elastic solutions to interface crack problems are discussed in both the open formulation, in which the crack faces are assumed to be traction-free and interpenetration is permitted, and the unilateral formulation, where a contact zone is generally established adjacent to the crack tips. It is shown that if the contact zone is sufficiently small compared with the other dimensions ...
متن کاملExterior Interface Cracks
Abstract-Continuing a recent investigation of interface cracks, attention is paid to the exterior crack. Two elastic solids bonded over a finite segment of their boundary and capable of transmitting shear and tensile tractions are considered. It is found that one of the edge cracks remains completely closed under shear alone, and opens gradually as the level of tension is increased. Both crack ...
متن کاملAn Average Flow Model of the Reynolds Roughness Including a Mass-Flow Preserving Cavitation Model
An average Reynolds equation for predicting the effects of deterministic periodic roughness, taking JFO mass flow preserving cavitation model into account, is introduced based upon double scale analysis approach. This average Reynolds equation can be used both for a microscopic interasperity cavitation and a macroscopic one. The validity of such a model is verified by numerical experiments both...
متن کاملStatic Friction Experiments and Verification of an Improved Elastic-Plastic Model Including Roughness Effects
An experimental study was conducted to measure the static friction coefficient under constant normal load and different interface conditions. These include surface roughness, dwell time, displacement rate, as well as the presence of traces of lubricant and wear debris at the interface. The static friction apparatus includes accurate measurement of friction, normal and lateral forces at the inte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Civil Engineering Journal
سال: 2014
ISSN: 1874-1495
DOI: 10.2174/1874149501408010263