An Investigation on Fracture Toughness of Glass Fiber Composite with Banana Fiber Composite

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Moisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)

In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...

متن کامل

Low-Cost Coir Fiber Composite with Integrated Strength and Toughness

With the growing environmental problems and depletion of petroleum resources, there is an urgent demand for the biorenewable, sustainable, and environmentally friendly composite materials. Here, we report a green coir fiber composite with specific mechanical properties superior to that of other reported natural fiber/polymer composites. After treatment, both strength and toughness of the compos...

متن کامل

Optical Fiber Embedded in Epoxy Glass Unidirectional Fiber Composite System

We aimed to embed silica optical fibers in composites (epoxy vinyl ester matrix reinforced with E-glass unidirectional fibers in mass fraction of 60%) in order to further monitor the robustness of civil engineering structures (such as bridges). A simple system was implemented using two different silica optical fibers (F1-double coating of 172 µm diameter and F2-single coating of 101.8 µm diamet...

متن کامل

An Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene

Abstract   Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...

متن کامل

Statistical Investigation of Parameters Influence on Fracture Toughness of the Glass Fiber Reinforced Composites

The objective of the work was to investigate statistical analysis of fracture toughness of the glass fiber reinforced composites at different stacking sequences, strain rate and crack length. The glass reinforced vinylester composites prepared by hand layup technique with stacking sequences of 0/90, 45/-45 and chopped strand orientations. 3point bending for fracture toughness test for various n...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology

سال: 2019

ISSN: 2321-9653

DOI: 10.22214/ijraset.2019.4329