An Optimization Approach for Components Built by Fused Deposition Modeling with Parametric Internal Structures
نویسندگان
چکیده
منابع مشابه
Curved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملStructural shape parametric optimization for an internal structural-acoustic problem
A structural shape optimization problem, with respect to the structural aspect ratio is developed in the context of an axisymmetric structural-acoustic system, consisting of an elastic dome coupled with an internal acoustic cavity, is analyzed in the lowand medium-frequency ranges. The dome is a thin shell considered as a three-dimensional continuum with a dissipative constitutive equation. The...
متن کاملStudy of parametric optimization of fused deposition modelling process using response surface methodology
FDM(fused deposition modelling) is a RP(rapid prototyping)technique used to manufacture prototypes on additive manufacturing technology.The material used is ABS(acronitirile butadiene styrene) plastic.The prototypes are made layer by layer addition of semi molten plastic and their joining by diffusion welding.In the present study effect of different parameters on response is studied.RSM(respons...
متن کاملParametric Modeling and Shape Optimization of Offshore Structures
The paper presents an optimization system which integrates a parametric design tool, 3D diffraction-radiation analysis and hydrodynamic performance assessment based on short and long term wave statistics. Controlled by formal optimization strategies the system is able to design offshore structure hulls with superior seakeeping qualities. The parametric modeling tool enables the designer to spec...
متن کاملNon-isotropic Material Distribution Topology Optimization for Fused Deposition Modeling Products
Mechanical properties of products produced with the Fused Deposition Modeling (FDM) process are known to be dependent on bead direction, especially when short fiber reinforcement is added to the polymer filament feedstock. As a result, the structural performance of fiber-filled FDM parts is expected to be improved by simultaneously computing preferred deposition directions while optimizing the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2014
ISSN: 2212-8271
DOI: 10.1016/j.procir.2014.02.050