An overview of interface cracks
نویسندگان
چکیده
منابع مشابه
An Overview of Interface Cracks
In many cases cracks leading to fracture occur at interfaces between two different constituents, e.g. a fiber and the matrix in a composite. The early solutions of such problems in the context of linear elastic fracture mechanics (LEFM) revealed the presence of an unsatisfactory behavior: rapid oscillations in the stress and displacement fields, implying the physically impossible phenomenon of ...
متن کاملInterface Cracks
-Properties of elastic solutions to interface crack problems are discussed in both the open formulation, in which the crack faces are assumed to be traction-free and interpenetration is permitted, and the unilateral formulation, where a contact zone is generally established adjacent to the crack tips. It is shown that if the contact zone is sufficiently small compared with the other dimensions ...
متن کاملExterior Interface Cracks
Abstract-Continuing a recent investigation of interface cracks, attention is paid to the exterior crack. Two elastic solids bonded over a finite segment of their boundary and capable of transmitting shear and tensile tractions are considered. It is found that one of the edge cracks remains completely closed under shear alone, and opens gradually as the level of tension is increased. Both crack ...
متن کاملMixed Mode Fracture Analysis of Multiple Interface Cracks
This paper contains a theoretical formulation of multiple interface cracks in two bonded dissimilar half planes subjected to in-plane traction. The distributed dislocation technique is used to construct integral equations for a dissimilar mediums weakened by several interface cracks. These equations are of Cauchy singular type at the location of dislocation, which are solved numerically to obta...
متن کاملVme Bus Interface- an Overview
Versa Module Eurocard (VME) backplane bus is a computer bus standard, originally developed for the Motorola 68000 line of CPUs, but later widely used for many applications and standardized by the IEC as ANSI/IEEE 1014-1987. It is physically based on Eurocard sizes, mechanicals and connectors (DIN 41612), but uses its own signalling system. This paper describes the general characteristics of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Fracture Mechanics
سال: 1990
ISSN: 0013-7944
DOI: 10.1016/0013-7944(90)90343-f