Analyses of Fatigue Test Data of Offshore Tubular Joints
نویسندگان
چکیده
منابع مشابه
Fatigue Life of Repaired Welded Tubular Joints
In this study, the effect of repair on fatigue life of tubular joints is investigated. Six cracked specimens precedently subjected to fatigue loading undergone to weld repair. Two of those specimens were shot peened before primary fatigue loading. It is shown that repair gives rise to about 150% increase in fatigue life for original specimens while the increase of fatigue life for shot-peened ...
متن کاملReliability Analysis of Tubular Joints of Offshore Platforms in Malaysia
The oil and gas industry has moved towards Load and Resistance Factor Design through API RP2A LRFD and the recently published international standard, ISO-19902, for design of fixed steel offshore structures. The ISO 19902 is intended to provide a harmonized design practice that offers a balanced structural fitness for the purpose, economy and safety. As part of an ongoing work, the reliability ...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملParametric Study of SCFs in Unstiffened Gap Tubular KT-joints of Offshore Structures under OPB Moment Loading
In this paper, results extracted from a set of stress analyses performed on 46 FE models for unstiffened gap tubular KT-joints are presented and discussed. The main objective of the FE analyses, validated against experimental data, was to run a parametric investigation on the effects of geometrical characteristics of the joint on the values of the stress concentration factors (SCFs). The SCF is...
متن کاملExperimental and Numerical Investigation of Geometric SCFs in Internally Ring-Stiffened Tubular KT-Joints of Offshore Structures
Tubular KT-joints are quite common in offshore structural design and despite the crucial role of stress concentration factors (SCFs) in evaluating the fatigue performance of tubular joints. However, the SCF distribution in internally ring-stiffened KT-joints have not been investigated and no design equation is currently available to determine the SCFs for this type of joint. In the present pape...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 1985
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.1985.312