Analysis and fabrication of a prism film with roll-to-roll fabrication process
نویسندگان
چکیده
منابع مشابه
Roll-to-roll fabrication of organic nanorod electrodes for sodium ion batteries
0.1016/j.nanoen.2 lsevier Ltd. All rig thor. [email protected] Abstract Organic electroactive materials derived from biomasses are promising candidates for next generation rechargeable batteries due to the low cost, sustainability and environmental benignity. Since organic materials have very low electronic conductivity, they are normally synthesized into nano-scale and mixed with conductive carbon...
متن کاملInvestigation of Roll-to-Sheet Imprinting for the Fabrication of Thin-film Transistor Electrodes
We applied a roll-to-sheet imprinting process to a largescale substrate. Patterned ruthenium oxide (RuO2) electrodes were fabricated on both glass and flexible substrates. The resistivity of the electrodes on a glass substrate was 3.5×10−5 Ω cm, which indicates that this technique is useful for the fabrication of thin-film transistor (TFT) electrodes. key words: Nano-rheology Printing, Oxide TF...
متن کاملCotton-textile-enabled flexible self-sustaining power packs via roll-to-roll fabrication
With rising energy concerns, efficient energy conversion and storage devices are required to provide a sustainable, green energy supply. Solar cells hold promise as energy conversion devices due to their utilization of readily accessible solar energy; however, the output of solar cells can be non-continuous and unstable. Therefore, it is necessary to combine solar cells with compatible energy s...
متن کاملRoll-to-roll fabrication of large scale and regular arrays of three-dimensional nanospikes for high efficiency and flexible photovoltaics
Three-dimensional (3-D) nanostructures have demonstrated enticing potency to boost performance of photovoltaic devices primarily owning to the improved photon capturing capability. Nevertheless, cost-effective and scalable fabrication of regular 3-D nanostructures with decent robustness and flexibility still remains as a challenging task. Meanwhile, establishing rational design guidelines for 3...
متن کاملStress Analysis and Energy Estimation in Cold-Roll Forming Process
In this article, stress analysis and energy estimation during cold-roll forming of symmetrical channel sections have been discussed. Geometry of sheet strip is pre-estimated by a shape function. Then longitudinal, transversal and shear strains have been calculated. Using both the Levy-Mises and the Prandtl Reuss equations, and also considering the Bauschinger effect, stress distributions have b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2009
ISSN: 1094-4087
DOI: 10.1364/oe.17.004718