Analysis and optimization of sandwich tubes energy absorbers under lateral loading
نویسندگان
چکیده
منابع مشابه
Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers
In this article, the multi-objective optimization of cylindrical aluminum tubes under axial impact load is presented.The absorbed energy and the specific absorbed energy (SEA) are considered as objective functions while the maximum crush load should not exceed allowable limit. The geometric dimensions of tubes including diameter, length and thickness are chosen as design variables. The Non-domi...
متن کاملA comparative Analysis of Experimental and Numerical Investigations of Composite Tubes under Axial and Lateral Loading
Quasi-static tests are performed in order to determine the crash behavior of composite tubes. The specimens are made from woven fiber carbon/epoxy. The crash experiments show that the tubes crushed in a progressive manner from one end to the other of the tubes while delamination was taking place between the layers. In the simulation works described in this paper the ANSYS explicit finite elemen...
متن کاملNon-linear Dynamic Analysis of Steel Hollow I-core Sandwich Panel under Air Blast Loading
In this paper, the non-linear dynamic response of novel steel sandwich panel with hollow I-core subjected to blast loading was studied. Special emphasis is placed on the evaluation of midpoint displacements and energy dissipation of the models. Several parameters such as boundary conditions, strain rate, mesh dependency and asymmetrical loading are considered in this study. The material and geo...
متن کاملNumerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading
In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...
متن کاملeconomic optimization and energy consumption in tray dryers
دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Impact Engineering
سال: 2015
ISSN: 0734-743X
DOI: 10.1016/j.ijimpeng.2015.01.005