Analysis, Design, and Generalization of Electrochemical Impedance Spectroscopy (EIS) Inversion Algorithms

Interface Design for CMOS-Integrated Electrochemical Impedance Spectroscopy (EIS) Biosensors

Electrochemical Impedance Spectroscopy (EIS) is a powerful electrochemical technique to detect biomolecules. EIS has the potential of carrying out label-free and real-time detection, and in addition, can be easily implemented using electronic integrated circuits (ICs) that are built through standard semiconductor fabrication processes. This paper focuses on the various design and optimization a...

Equivalent Electrical Circuit Modeling of Ceramic-Based Microbial Fuel Cells Using the Electrochemical Impedance Spectroscopy (EIS) Analysis

The effect of the thickness of ceramic membrane on the productivity of microbial fuel cells (MFCs) was investigated with respect to the electricity generation and domestic wastewater treatment efficiencies. The thickest ceramic membrane (9 mm) gained the highest coulombic efficiency (27.58±4.2 %), voltage (681.15±33.1 mV), and current and power densities (447.11±21.37 mA/m2, 63.82±10.42 mW/m2) ...

Stress Corrosion Cracking Detection of Sensitized Stainless Steel 304 in Chloride Media by Using Electrochemical Impedance Spectroscopy (EIS)

Electrochemical impedance spectroscopy (EIS) was used to detect stress corrosion cracking (SCC) in stainless steel 304 alloy exposed to an aqueous environment at 120 °C. Stainless steel 304 alloy as u-bend was tested in the solution that contains 40 weight percent of magnesium chloride. U-bended samples were prepared according to ASTM G30. EIS measurements were always performed simultaneously o...

Use of Electrochemical Impedance Spectroscopy (EIS) for the Evaluation of Electrocoatings Performances

27 Application of Electrochemical Impedance Spectroscopy ( EIS ) and X - ray Photoelectron Spectroscopy ( XPS ) to the Characterization of RTILs for Electrochemical Applications

Ionic liquids (ILs) are low temperature molten salts, that is, a salt in the liquid state. ILs used to present a very low vapour pressure and this property makes of the ILs key materials for the development of a wide variety of emerging technologies. The stability of ILs at high temperatures (several hundred degrees), low combustibility, and even the relatively high viscosity of some of them co...