ANALYSIS OF BI-COLD FORMED STEEL CONCRETE COMPOSITE BEAMS
نویسندگان
چکیده
منابع مشابه
Nonlinear Time-Dependent Behavior of Composite Steel-Concrete Beams
This paper presents a mixed finite element model for the nonlinear time-dependant analysis of composite beams with partial shear connection. The key idea is to consider, as a first approach, a viscoelastic/plastic model for the concrete slab in order to simulate the interaction between the time effects of concrete, such as creep and shrinkage, and the concrete cracking. Creep is taken into acco...
متن کاملLong-term Stress of Simply Supported Steel-concrete Composite Beams
The theoretical model to compute the long-term stress of simply supported steel-concrete composite beam was deduced. The model includes the effects of steel bars in concrete slab, concrete shrinkage and creep. The computed results agreed well with the test results. On this basis, the effects of factors such as concrete age to loading, longitudinal reinforcement ratio in concrete slab, concrete ...
متن کاملExperimental Investigation on Cold-Formed Steel Foamed Concrete Composite Wall under Compression
A series of tests on cold-formed steel foamed concrete (CSFC) composite walls subjected to axial load were proposed. The primary purpose of the experiments was to study the mechanical behavior and identify the failure modes of CSFC composite walls. Two main factors were considered in this study: 1) specimen with pouring foamed concrete or without and 2) different foamed concrete density ranks (...
متن کاملLocal Buckling Tests on Cold-Formed Steel Beams
C and Z sections are two of the most common cold-formed steel shapes in use today. Accurate prediction of the bending performance of these sections is important for reliable and efficient cold-formed steel structures. Recent analytical work has highlighted discontinuities and inconsistencies in the American Iron and Steel Institute ~AISI! and Canadian Standards Association ~S136! design provisi...
متن کاملDistortional Buckling Tests on Cold-Formed Steel Beams
Failure in cold-formed steel beams is generally initiated by one of three instabilities: local, distortional, or lateral-torsional buckling. For cold-formed steel joists, purlins, or girts, when the compression flange is not restrained by attachment to sheathing or paneling, distortional buckling may be the predominant failure mode. Experimental results on cold-formed steel beams with unrestrai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JES. Journal of Engineering Sciences
سال: 2006
ISSN: 2356-8550
DOI: 10.21608/jesaun.2006.109462