Analysis of Deformation in Ni-Cr Structures with New and Recast Alloys
نویسندگان
چکیده
منابع مشابه
Microstructural Examination of Ni-ion Irradiated Fe-Ni-Cr Alloys Followed to Micro-zone Deformation
Examination of deformation microstructures induced by micro-indentation technique by means of transmission electron microscopy following an MV range metallic ion irradiation was performed in order to study the influence of irradiation-produced microstructural defects on plastic deformation behavior of materials. In this work, specimens of an Fe-Cr-Ni austenitic model ternary alloy before and af...
متن کاملOxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملLaser Welded Ni-Cr Dental Alloys Inspection
Minor problems arising from optimizations by welding of fixed prostheses frameworks can be identified by macroscopic and microscopic visual inspection. The purpose of this study was to highlight the visible discontinuities present in the laser welds of dental Ni-Cr alloys. Ni-Cr base metal alloys designated for fixed prostheses manufacture were selected for the experiments. Using cast plates, p...
متن کاملLaser Welded Ni-Cr Dental Alloys Inspection
Minor problems arising from optimizations by welding of fixed prostheses frameworks can be identified by macroscopic and microscopic visual inspection. The purpose of this study was to highlight the visible discontinuities present in the laser welds of dental Ni-Cr alloys. Ni-Cr base metal alloys designated for fixed prostheses manufacture were selected for the experiments. Using cast plates, p...
متن کاملMORPHOLOGY, DEFORMATION, AND DEFECT STRUCTURES OF TiCr2 IN Ti..Cr ALLOYS
The morphologies and defect structures of TiCr2 in several Ti-Cr alloys have been examined by optical metallography, x-ray diffraction, and transmission electron microscopy (TEM), in order to explore the room-temperature deformability of the Laves phase TiCr 2. The morphology of the Laves phase was found to be dependent upon alloy composition and anneating temperature. Samples deformed by compr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Sciences and Applications
سال: 2015
ISSN: 2153-117X,2153-1188
DOI: 10.4236/msa.2015.67072