Analysis of Mold Wear during Continuous Casting of Slab.

Physical Modeling of Steel Delivery during Thin Slab Continuous Casting

A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...

physical modeling of steel delivery during thin slab continuous casting

a full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (sen) was constructed. on the basis of the dimensionless reynolds and froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. in order to determine the optimum ope...

Adaptive Mold Level Control in a Continuous Steel Slab Casting Process

Surface quality of the steel slabs in a Continuous Casting (C.C.) process is mainly determined by the stability of the Mold Level Control (MLC). Excessive mold level fluctuations lead to an additional machine scarfing process which is applied to the slabs to avoid surface defects. A conventional Proportional-Integral-Derivative (PID) controller is not robust enough to deal with the disturbances...

Transient Fluid-Flow Phenomena in the Continuous Steel-Slab Casting Mold and Defect Formation

Phenomena associated with the turbulent flow of molten steel in a continuous casting mold are responsible for many defects in the final product, including surface slivers, frozen meniscus hooks, captured inclusions that enter the mold from upstream, and mold slag entrapment. Animations of some of these transient flow phenomena are presented from Large-Eddy Simulations of a typical slab caster w...

Numerical Simulation of Slab Broadening in Continuous Casting of Steel