Analysis of Prestressing in Precast Prestressed Concrete Beams
نویسندگان
چکیده
منابع مشابه
Nonlinear Damping Identification in Precast Prestressed Reinforced Concrete Beams
This article presents a damage detection method for prestressed reinforced concrete (PRC) elements based on free vibration tests and nonlinear damping identification. Integrated static and dynamic experiments were carried out on three precast PRC beam specimens. The static loading induced different levels of damage to the beams. At each damage level, impulsive loading was applied to the beams a...
متن کاملAdvantages of Large Strands in Precast/Prestressed Concrete Highway Application
The objective of this research is to investigate the advantages of using large-diameter 0.7 inch prestressing strands in pretention applications. The advantages of large-diameter strands are mainly beneficial in the heavy construction applications. Bridges and tunnels are subjected to a higher daily traffic with an exponential increase in trucks ultimate weight, which raise the demand for highe...
متن کاملOptimization of Precast Prestressed Concrete Bridge Girder Systems
60 A practical approach to the optimal design of precast, prestressed concrete highway bridge girder systems is presented. The approach aims at standardizing the optimal design of bridge systems, as opposed to standardizing girder sections. Structural system optimization is shown to be more relevant than conventional girder optimization for an arbitrarily chosen structural system. Bridge system...
متن کاملNon - linear analysis of externally prestressed concrete beams
In an external prestressing system, there is no strain compatibility between the cable and the concrete at every cross-section, the increment of cable strain must be evaluated by taking into account the whole structure, rather than performing the calculation at each section, independently. In this study, a method for the calculation of cable strain, which is based on the deformation compatibili...
متن کاملHeuristic optimization of prestressed concrete precast pedestrian bridges
This paper deals with the economic optimization of prestressed concrete precast pedestrian bridges typically used in public works construction. These bridges are made of a precast concrete beam that integrates an upper reinforced concrete slab for the pedestrian traffic. The beam has a U-shape cross-section. Typical span lengths range from 20 to 40 m and the width ranges from 3.00 to 6.00 m. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil and Environmental Engineering
سال: 2021
ISSN: 2199-6512,1336-5835
DOI: 10.2478/cee-2021-0019