Analysis of Real-Time Execution Models for Container-Based Control Applications
نویسندگان
چکیده
Abstract Software-defined Manufacturing (SDM) aims to enhance the flexibility of production systems. Classical automation systems are not a suitable technological basis for SDM. While their hierarchical, rigid structures increasingly being dissolved. Container-based virtualization, and modular software architectures, gain traction in However, today’s PLCs perfect fit as control program still is monolithic piece software. We analyze cyclic event-based real-time scheduling models PLCs. Furthermore, techniques reconfiguration at runtime developed based on selected execution models.
منابع مشابه
Execution Time Analysis for Industrial Control Applications
Estimating the execution time of software components is often mandatory when evaluating the nonfunctional properties of software-intensive systems. This particularly holds for real-time embedded systems, e.g., in the context of industrial automation. In practice it is however very hard to obtain reliable execution time estimates which are accurate, but not overly pessimistic with respect to the...
متن کاملSimulation of a Neutron Detector for Real Time Imaging Applications
Monte Carlo Method is used to simulate a double layer gadolinium-amorphous silicon thermal neutron detector. The detector fabricated in pixel array configuration has various applications including neutron imaging. According to the simulation results, a detector consisting of a gadolinium (Gd) film with thickness of 2-4 ~m, sandwiched properly with two layers of sufficiently thick (-30 ?µm) hydr...
متن کاملReal-Time Execution Control for Autonomous Systems
There is an increasing need for advanced autonomy in complex embedded real-time systems such as robots, satellites, or UAVs. Still, the growing complexity of the decision capabilities of these systems raises a major problem: how to prove that the system is not going to end in a dangerous state (for itself or for humans)? How to guarantee that the robot will not grab a sample on the ground with ...
متن کاملInvestigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کاملA Real-time Control System for Industrial Robots and Control Applications Based on Real-time Linux
Rapid prototyping is a well recognized need in the design and development phases of advanced systems for automation. In particular, this concept is also important for the design and experimentation of control algorithms and new mechanical prototypes in advanced robotics. Moreover, flexibility, short development times and contained economical costs are other important features considered in deve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ARENA2036
سال: 2023
ISSN: ['2524-7255', '2524-7247']
DOI: https://doi.org/10.1007/978-3-031-27933-1_2