Analysis of Strength Parameters at Tension of Epoxy-Glass Composites with Rubber Recyclate Addition

نویسندگان

چکیده

Abstract The aim of the research was to analyze strength parameters epoxy-glass sandwich composites with addition rubber recyclate. Material samples were subjected a static tensile test performed on universal testing machine in accordance current standard for fiber-reinforced composite materials. results showed that recyclate increases plastic composite, which allows considering use tested material structures loaded vibration and noise scale. modify reduce amount waste ensures durability new material.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Estimation of the Dynamic Properties of Epoxy Glass Fabric Composites with Natural Rubber Particle Inclusions

Conventional materials are being replaced in the field of engineering by composite materials, due to their tailorable properties and high specific properties. These materials are extensively used in structural applications. Damping is one of the important properties of the materials used in structures, and needs to be enhanced in order to reduce structural vibrations. In the present work, the i...

متن کامل

Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

متن کامل

Dry Sliding Wear Behavior of Epoxy-Rubber Dust Composites

Composite pins of rubber dust collected from tyre retreading centres of trucks, cars and buses etc.and epoxy with weight percentages of 10. 15, and 20 % of rubber (weight fractions of 9, 13 and 17 % respectively) have been prepared in house with the help of a split wooden mould. The pins were tested in a pin-on-disc wear monitor to determine the co-efficient of friction and weight losses with v...

متن کامل

Analysis of MWCNT/epoxy composites at microwave frequency: reproducibility investigation

A wide-band microwave characterization of nanocomposites based on commercial multiwalled carbon nanotubes (MWCNTs) and epoxy resin is presented. The sample preparation method is discussed in detail. Field emission scanning electron microscopy is used for morphological sample analysis of nanocomposites and MWCNTs. The complex permittivity is measured in a wide frequency band (3 to 18 GHz) using ...

متن کامل

Fatigue and ultrasonic testing of epoxy-glass composites

Purpose: The purpose of this paper was to find relationship between the degree of strength degradation caused by fatigue and the changes of ultrasonic wave characteristics such as wave velocity and damping coefficient. Design/methodology/approach: Epoxy-glass composites were subjected to oscillatory bending loadings with constant deflection. During fatigue procedure the force needed to achieve ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Konbin

سال: 2022

ISSN: ['1895-8281', '2083-4608']

DOI: https://doi.org/10.2478/jok-2022-0009