Analysis of Structure with Uncertainty in Shape by Stochastic Finite Element Method
نویسندگان
چکیده
منابع مشابه
Analysis of non-connected piled raft foundations (NCPRF) with cushion by finite element method
For the optimum design of Piled Raft Foundations (PRF), the concept of settlement reducer piles has been applied. However, when these piles are connected to the raft, a high stress may develop in the relatively small number of piles. Therefore, an alternative approach is to disconnect the piles from the raft forming a new system called a non-connected or disconnected piled-raft foundation (NCPR...
متن کاملFinite Element Stochastic Analysis
Numerical models can be valuable tools in the prediction of seepage. The results can often be misleading if proper variational analysis is not performed. Measurement of the soil-water characteristic curve (SWCC) or saturated and unsaturated hydraulic conductivity information is often neglected or minimized. The modeller is therefore forced to develop a seepage model based on estimated soil prop...
متن کاملAnalysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method
Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphson's method and are solved by Gaussian e...
متن کاملA Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملAnalysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method
Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphsons method and are solved by Gaussian el...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1982
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.48.339