Analysis of Thermal Stress during Welding
نویسندگان
چکیده
منابع مشابه
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE)
Friction stir welding (FSW) can be defined as a green technology, because the consumption of energy during this process is less than other welding methods. In addition, during the process there is no gas, filler material or other consumables. It should be noted that, complex curved shapes are now commonly used in different industries in a bid to have lightweight structures. According to the abo...
متن کاملStress Analysis Near the Welding Interface Edges of a QFP Structure under Thermal Loading
The purpose of this paper was to investigate the reason why the interface delaminations occurred in the QFP structure. The stress concentration was the key factor responsible for the microcrack occurrence. In order to figure out which factors affect the stress distribution, the material’s attributes and the structure’s dimension were considered. The finite element program ABAQUS6.9 together wit...
متن کاملParametric finite element analysis of stress evolution during friction stir welding
It is well known that the residual stress of the friction-stir-welded joint affects the fatigue strength and life, and the corrosion performance. In this paper, a three-dimensional finite element model is established to study the thermal history and stress evolution in the butt welding of aluminium alloy 6061-T6, which will comprehensively provide insight into the friction-stir-welding process....
متن کاملVesiculation of sickle erythrocytes during thermal stress.
Since it is not known why sickle RBCs tend to undergo microvesiculation, we have investigated their susceptibility to thermal stress. While normal RBCs start to vesiculate at 49.0 +/- 0 degrees C (n = 14), sickle RBCs begin to vesiculate at 47.9 +/- 0.5 degrees C, with a range of 46.5 to 48.5 degrees C (n = 14). This abnormality is reproduced by treating normal RBCs with phenazine methosulfate ...
متن کاملThermal Efficiency of Arc Welding Processes
A study was conducted on the arc and melting efficiency of the plasma arc, gas tungsten arc, gas metal arc, and submerged arc welding processes. The results of this work are extended to develop a quantitative method for estimating weld metal dilution in a companion paper. Arc efficiency was determined as a function of current for each process using A36 steel base metal. Melting efficiency was e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Naval Architects of Japan
سال: 1971
ISSN: 1884-2070,0514-8499
DOI: 10.2534/jjasnaoe1968.1971.130_203