Analysis of transformation-induced crack closure
نویسندگان
چکیده
منابع مشابه
Theory for the rate of crack closure
The theory for the constant rate of crack closure was investigated. The aim of this theory is to explain why the rate of crack closure is constant during the wetting stage of healing. Assuming that a surface crack in a material is treated by compression or with solvent, its crack closes up at a constant rate and its shape is independent of time. This approach was based on the Gibbs energy of an...
متن کاملPartial crack closure under block loading
Fatigue crack propagation tests under high–low and low–high block loading sequences have been performed in aluminium alloy specimens. The tests were carried out at constant DK conditions. Two stress ratios were analysed: R = 0.05 and R = 0.4. Crack closure was monitored in all tests by the compliance technique using a pin microgauge. The observed transient post load step behaviour is discussed ...
متن کاملOn Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملAn Evaluation of the Plasticity-Induced Crack-Closure Concept and Measurement Methods
An assessment of the plasticity-induced crack-closure concept is made, in light of some of the questions that have been raised on the validity of the concept, and the assumptions that have been made concerning crack-tip damage below the crack-opening stress. The impact of using other crack-tip parameters, such as the cyclic crack-tip displacement, to model crack-growth rate behavior was studied...
متن کاملCold work simulation of hole expansion process and its effect on crack closure
Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Fracture Mechanics
سال: 1991
ISSN: 0013-7944
DOI: 10.1016/0013-7944(91)90068-c