Analysis of Uncut Milling Chip Thickness Based on Trochoidal Tooth Path
نویسندگان
چکیده
منابع مشابه
Modeling of three-dimensional cutting forces in micro-end-milling
A new nominal uncut chip thickness algorithm for micro-scale end-milling is proposed by considering the combination of an exact trochoidal trajectory of the tool tip and tool run-out, and then the actual uncut chip thickness may be obtained from a comparison between the current accumulative uncut chip thickness and the minimum chip thickness. Due to the intermittency of the chip formation, the ...
متن کاملChip Formation and Minimum Chip Thickness in Micro-milling
In the current context of miniaturization, micro-machining processes are in full expansion. One of them is micro-milling. Although micro-milling is based on the same principle as macro-milling, the phenomena of micro-cutting are not a simple scaling of macrocutting. A significant difference is the chip formation involving the phenomenon of minimum chip thickness. In micro-milling the depth of c...
متن کاملMilling Tool-Path based on Micrography
The objective of my research is to design and develop a unique tool-path planning system based on Micrography. CNC milling machines are extremely accurate, and fully automated; they are used widely in manufacturing industries. Thus, the some improvement of their tool-paths can have a widespread impact in this world. Figure 1 shows that tool-path planning for a simple pocket leads to various dif...
متن کاملCutting Kinematics Analysis in Hypocycloidal Tooth Milling of Cylindrical Gears
The hypocycloidal flanks of the cylindrical gear teeth have the flank lines defined by lengthened or shortened hypocycloid and the profile involute. The curved and bulged flanks have some advantages, among them being the increased strength in bending and controlled positioning of the contact imprint. The tooth flank generation has on the basis the application of the technological process of mil...
متن کاملfabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical Engineering
سال: 2019
ISSN: 0577-6686
DOI: 10.3901/jme.2019.07.234