Analysis of Vibration by Component Mode Synthesis Method : 6th Report, Application to Continuous Centrifuge

تحلیل مودال با استفاده از روش component mode synthesis (cms) همراه با صحه گذاری تجربی

در این پروژه روش های تحلیل مودال سازه هایی که از چند زیرسازه تشکیل شده اند بررسی شده است. از جمله این روش ها روش سنتز مودها است که ابتدا بطور مختصر تاریخچه فعالیت هایی که در این زمینه تا کنون انجام شده است بررسی شده و سپس الگوریتم های مختلف این روش مورد مطالعه قرار گرفته است. از جمله این الگوریتم ها روش سطوح مشترک ثابت و روش سطوح مشترک آزاد است طوریکه روش اول با دقت بیشتر و تنها برای داده های ت...

NURBS-Based Isogeometric Analysis Method Application to Mixed-Mode Computational Fracture Mechanics

An interaction integral method for evaluating mixed-mode stress intensity factors (SIFs) for two dimensional crack problems using NURBS-based isogeometric analysis method is investigated. The interaction integral method is based on the path independent J-integral. By introducing a known auxiliary field solution, the mixed-mode SIFs are calculated simultaneously. Among features of B-spline basis...

Overlapping Component Mode Synthesis

Tools for Analytical and Numerical Analysis of Electrostatic Vibration Energy Harvesters: Application to a Continuous Mode Conditioning Circuit

This paper reports the application of different analytical tools to a basic continuous conditioning (CC) circuit for electrostatic vibration energy harvesters (e-VEHs). We address the fundamental issues of this conditioning circuit and give design advice that enhances the performance of e-VEHs employing this circuit. This circuit is widely used for harvesters with or without an electret layer. ...

Efficient Component Mode Synthesis with a New Interface Reduction Method

When the finite element model of a complex structure is partitioned into substructures in order to enable component mode synthesis (CMS), there may be a large number of degrees of freedom (DOF) on the interface between components. In such a case, the constraint-mode-related coordinate transformation at the substructure analysis stage becomes computationally expensive, and the CMS model may be c...