Analysis of wear abrasion resistance of superhydrophobic acrylonitrile butadiene styrene rubber (ABS) nanocomposites
نویسندگان
چکیده
منابع مشابه
Mimicking Hardwoods Using Honeycombs Manufactured from Acrylonitrile Butadiene Styrene (ABS): A Comparison of Mechanical Properties
Wood has been used as a material to build mechanical structures for thousands of years. As a natural composite of cellulose fibers embedded in a matrix of lignin, this organic, cellular solid resists both tension and compression. Its properties depend on the direction of loading of its cells − whether radially, tangentially, or axially − and such anisotropy is modeled well as a regular honeycom...
متن کاملAcrylonitrile Butadiene Styrene (ABS) plastic‐based low cost tissue equivalent phantom for verification dosimetry in IMRT
A novel IMRT phantom was designed and fabricated using Acrylonitrile Butadiene Styrene (ABS) plastic. Physical properties of ABS plastic related to radiation interaction and dosimetry were compared with commonly available phantom materials for dose measurements in radiotherapy. The ABS IMRT phantom has provisions to hold various types of detectors such as ion chambers, radiographic/radiochromic...
متن کاملDegradation of acrylonitrile-butadiene-styrene and polycarbonate by UV irradiation
The eects of ultra-violet irradiation on the microstructure of an oxygen free polymer viz., acrylonitrile-butadiene-styrene and a polymer containing oxygen viz., polycarbonate have been investigated using positron annihilation lifetime measurement. Lifetime results in both polymers in the early stages of irradiation indicate that chain-scission leading to free radical formation is the predomin...
متن کاملeffect of the compatibilizer upon the properties of styrene-butadiene rubber organoclay nanocomposites
nanocomposite vulcunizates based on styrene-butadiene rubber (sbr), organoclay and a conventional sulfur curing system were prepared by melt blending process in an internal mixer. in order to study the effects of the type of interfacial compatibilizer on the properties of sbr and clay nanoparticles,three types of compatibilizers, maleic anhydride grafted ethylene-propylene diene rubber (epdm-g-...
متن کاملResistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
The rapid printing of 3D parts with desired electrical properties enables numerous applications. Fused deposition modeling (FDM) using conductive thermoplastic composites has been a valuable approach for such fabrication. The parts produced by FDM possess various controllable structural features, but the effects of the structural features on the electrical properties remain to be determined. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Journal
سال: 2015
ISSN: 1385-8947
DOI: 10.1016/j.cej.2015.06.086