Analysis of Weld Bead and Hardness during MIG Welding of Mild Steel
نویسندگان
چکیده
منابع مشابه
Effect of Mig Welding Input Process Parameters on Weld Bead Geometry on Hsla Steel
The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...
متن کاملWeld Quality Prediction of Mild Steel Pipe Joint during Shielded Metal Arc Welding through fuzzy Logic
The present paper describes fuzzy logic simulation of shielded metal arc welding (SMAW) process to predict the Quality of weld joint. It describe the quality of weld joint & effect of welding current, voltage and welding speed on tensile strength of shielded metal arc pipe welded mild steel joints. An ERW Mild steel pipe I S 1239 of 6 mm thickness and 150 mm diameter were used as the base mater...
متن کاملOptimization of Weld Bead Width in Tungsten Inert Gas Welding of Austenitic Stainless Steel Alloy
This paper investigates the effects of process parameters on weld bead width of austenitic stainless steel SS-310 in tungsten inert gas welding. The four parameters namely welding current, type of gas, gas flow rate and included angle of weld plates during butt joint were varied at three levels. The DOE approach was used to design experimental conditions. Orthogonal array L9 was used for carryi...
متن کاملPrediction of the Effect of Submerged Arc Welding Process Parameters on Weld Bead Width for MS 1018 Steel
The present investigation uses arc voltages, current, welding speed, wires feed rate and nozzle-to-plate distance as process parameters. Two level full factorial a technique has been used for experiment design. Multiple regression analysis has been used to develop a mathematical model to predict weld width using a single wire Submerged arc welding depositing bead-on-plate welds on 12mm plate. A...
متن کاملModeling of Weld Bead Geometry and Shape Relationships in Submerged Arc Welding using Developed Fluxes
To automate a welding process, which is the present trend in fabrication industry, it is essential that mathematical models have to be developed to relate the process variables to the weld bead parameters. Submerged arc welding (SAW) is characterized by its high reliability, deep penetration, smooth finish and high productivity especially for welding of pipes and boiler joints. In the present w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.31341