Analysis on machine tool systems using spindle vibration monitoring for automatic tool changer

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

Vibration in a Cracked Machine Tool Spindle with Magnetic Bearings

Due to manufacturing flaws or cyclic loading, cracks frequently appear in a rotating spindle system. These cracks markedly affect the dynamic characteristics in higher modes of the rotating machinery. For faster rotational speeds, especially for super-high-speed cutting, a spindle with magnetic bearings is necessary. However, most investigations into spindle system dynamic characteristics have ...

Machine-Condition Monitoring using Vibration Analysis

Perturbation Analysis of Spindle Speed Variation in Machine Tool Chatter

Spindle speed variation has been shown to be an effective method for chatter control. In this paper, a single-degree-of-freedom regenerative type chatter equation is treated using perturbation methods. Rather than using the time coordinate, the angle of revolution is taken as the independent coordinate for maintaining a constant delay in the equations. The spindle speed is taken to be harmonica...