Analytical model for the out-of-plane response of vertically spanning unreinforced masonry walls
نویسندگان
چکیده
منابع مشابه
Effective stiffness of unreinforced brick masonry walls
Code design of Unreinforced Masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness of URM walls. Current approaches estimate the effective stiffness as fixed ratio of the gross sectional stiffness but comparisons with experimental results have shown that this does not yield satisfactory predictions. In this paper, a recently developed ana...
متن کاملthe use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach
abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...
15 صفحه اولLimit states of modern unreinforced clay brick masonry walls subjected to in-plane loading
Recent research showed that the in-plane horizontal displacement capacity of unreinforced masonry (URM) walls depends on numerous factors that are not yet captured by current empirical drift capacity models; e.g., axial stress, shear span, geometry of the walls and the material used. In order to improve the performance-based assessment of URM wall buildings, future research should aim at develo...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
A homogenization approach for the limit analysis of out-of-plane loaded masonry walls
This paper addresses the usage of a simplified homogenization technique for the analysis of masonry subjected to out-of-plane loading. The anisotropic failure surface, based on the definition of a polynomial representation of the stress tensor components in a finite number of sub-domains, is combined with finite element triangular elements employed for the upper and lower bound limit analyses. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Earthquake Engineering & Structural Dynamics
سال: 2017
ISSN: 0098-8847
DOI: 10.1002/eqe.2929