Analytical Prediction of Chip Formation and Cutting Forces in Drilling Operation (3rd Report)
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Cutting Forces in Drilling Operation: Measurement and Modeling for Medium-scale Manufacturing Firms
Advanced manufacturing systems often caters to rapidly changing product specification determination by the continuously increasing productivity, flexibility and quality demands. The estimation of cutting forces is mandatory to select tools and accessories for machining. Complex interrelationships exist between process parameters and these forces. In the present work, the applicability and relat...
متن کاملMachining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites
During the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.Direct machining of polymers can be an option for personalized products and for manufacturing product samples. To obtain high quality products and reduce machining costs, it is very importa...
متن کاملMachining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy Based Nanocomposites
During the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.Direct machining of polymers can be an option for personalized products and for manufacturing product samples. To obtain high quality products and reduce machining costs, it is very importa...
متن کاملStudies on the Formation of Discontinues Rock Fragments during Drilling and Cutting Operation
* Corresponding author – [email protected] Tel: 414-229-4126 Fax:414-229-6958 ABSTRACT Understanding the fundamental tribology associated with the cutting of rock under extremely high pressure and high temperature (HPHT) conditions are extremely important in mining and drilling operations. In this paper, a rock fragmentation process is simulated during mechanical cutting of rock using an explicit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1987
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.53.1246