Anelastic Behavior of Small Dimensioned Aluminum

Abnormal behavior of silica doped with small amounts of aluminum

Silica is the most abundant mineral in the crust of the Earth. It has been demonstrated that the aluminum concentration in silica plays a key role in determining many properties of silica-based components. Although the alumina-silica system has been intensely studied, the effect of very small amounts of aluminum on the structure and properties of silica remains unclear. We report results of fir...

Anelastic Deformation of Boron Fibers

Mechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite

Rice Husk Ash (RHA) of three different particle size ranges (50 – 75 μm), (75 – 100μm) and (100 – 150μm) in 3, 6, 9 and 12 % by weight was reinforced with the aluminium alloy using stir cast route. The microstructure and mechanical properties of the fabricated composites were analyzed. The results reveal that the tensile strength, compressive strength and hardness of the aluminum alloy composit...

Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions

The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...

Anelastic convection-driven dynamo benchmarks

Benchmark solutions for fully nonlinear anelastic compressible convection and dynamo action in a rotating spherical shell are proposed. Three benchmarks are specified. The first is a purely hydrodynamic case, which is steady in a uniformly drifting frame. The second is a self-excited saturated dynamo solution, also steady in a drifting frame. The third is again a self-excited dynamo but is unst...