Anisotropic Yb:FAP laser ceramics by micro-domain control
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولComposite Laser Ceramics by Advanced Bonding Technology
Composites obtained by bonding materials with the same crystal structure and different chemical compositions can create new functions that do not exist in conventional concepts. We have succeeded in bonding polycrystalline YAG and Nd:YAG ceramics without any interstices at the bonding interface, and the bonding state of this composite was at the atomic level, similar to the grain boundary struc...
متن کاملAnalytical solution of anisotropic plastic deformation induced by micro-scale laser shock peening
Laser shock peening (LSP) is a process to improve material fatigue life by introducing compressive residual surface stress in a target. The residual stresses are introduced when a high-intensity laser impinges on an ablative layer deposited on the surface of the target material. The interaction between laser and the ablative layer creates a high pressure plasma that leads to plastic deformation...
متن کاملDirect Laser Sintering of Ceramics
For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...
متن کاملFunctionally Graded High Strengh Ceramics Obtained by Selective Laser Melting
Henriques B 1,2* 1CMEMS-UMinho, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal 2Federal University of Santa Catarina, Campus Blumenau , 89065-300, Blumenau/SC, Brazil *Corresponding author: Henriques B, CMEMS-UMinho, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal. Federal University of Santa Catarina, Campus Blumenau , 89065-300, Blumenau/SC, Brazil, E-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optical Materials Express
سال: 2014
ISSN: 2159-3930
DOI: 10.1364/ome.4.002006