Anode Surface Bioaugmentation Enhances Deterministic Biofilm Assembly in Microbial Fuel Cells
نویسندگان
چکیده
منابع مشابه
Anode materials for sediment microbial fuel cells.
INTRODUCTION Plant microbial fuel cells (P-MFCs), and more general sediment microbial fuel cells, make use of electricigenic metabolism of microorganisms in anoxic soils and sediments. Electricigenic microorganisms are able to respire organic carbon from the soil or sediment with an electrode as final electron acceptor [1]. In this work, the focus is on the anode buried in the sediment, the ele...
متن کاملARTICLE Impact of Initial Biofilm Growth on the Anode Impedance of Microbial Fuel Cells
Electrochemical impedance spectroscopy (EIS) was used to study the behavior of a microbial fuel cell (MFC) during initial biofilm growth in an acetate-fed, two-chamber MFC system with ferricyanide in the cathode. EIS experiments were performed both on the full cell (between cathode and anode) as well as on individual electrodes. The Nyquist plots of the EIS data were fitted with an equivalent e...
متن کاملImpact of initial biofilm growth on the anode impedance of microbial fuel cells.
Electrochemical impedance spectroscopy (EIS) was used to study the behavior of a microbial fuel cell (MFC) during initial biofilm growth in an acetate-fed, two-chamber MFC system with ferricyanide in the cathode. EIS experiments were performed both on the full cell (between cathode and anode) as well as on individual electrodes. The Nyquist plots of the EIS data were fitted with an equivalent e...
متن کاملEvaluation of multi-brush anode systems in microbial fuel cells.
The packing density of anodes in microbial fuel cells (MFCs) was examined here using four different graphite fiber brush anode configurations. The impact of anodes on performance was studied in terms of carbon fiber length (brush diameter), the number of brushes connected in parallel, and the wire current collector gage. MFCs with different numbers of brushes (one, three or six) set perpendicul...
متن کاملCopper anode corrosion affects power generation in microbial fuel cells
Non-corrosive, carbon-based materials are usually used as anodes in microbial fuel cells (MFCs). In some cases, however, metals have been used that can corrode (e.g. copper) or that are corrosion resistant (e.g. stainless steel, SS). Corrosion could increase current through galvanic (abiotic) current production or by increasing exposed surface area, or decrease current due to generation of toxi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: mBio
سال: 2021
ISSN: 2150-7511
DOI: 10.1128/mbio.03629-20