Anodic Corrosion Efficiency
نویسندگان
چکیده
منابع مشابه
Evolution of anodic stress corrosion cracking in a coated material
In the present paper, we investigate the influence of corrosion driving forces and interfacial toughness for a coated material subjected to mechanical loading. If the protective coating is cracked, the substrate material may become exposed to a corrosive media. For a stress corrosion sensitive substrate material, this may lead to detrimental crack growth. A crack is assumed to grow by anodic di...
متن کاملCorrosion Resistance Improvement of Aluminum by Hydrophobic Anodic Oxide Film
Diminishing surface wettability is an effective method to improve corrosion resistance of aluminum. Various techniques for preparing hydrophobic surface have been reported, most of which use organic coating as the final step. The key point to diminish surface wettability is to form a fine regular surface structure, and the porous type anodic oxide film (PAOF) has nano-pore structure, therefore ...
متن کاملCorrosion protection of iron using porous anodic oxide/conducting polymer composite coatings.
Conducting polymers (CPs), including polypyrrole, have attracted attention for their potential in the protection of metals against corrosion; however, CP coatings have the limitation of poor adhesion to metal substrates. In this study, a composite coating, comprising a self-organized porous anodic oxide layer and a polypyrrole layer, has been developed on iron. Because of electropolymerization ...
متن کاملIntroductory lecture on corrosion chemistry: a focus on anodic hydrogen evolution on Al and Mg.
The increase in the rate of hydrogen evolution (HE) on dissolving Mg surfaces with increasing anodic current density or potential, which is sometimes called the negative difference effect, has been the topic of much discussion in recent years. A review of the very recent contributions to this subject is given in this paper. Increased catalytic activity of the corrosion product layer, either fro...
متن کاملAnodic Photocurrents and Corrosion Currents on Passive and Active-Passive Metals
A photoelectrochemical study was made to compare Zr, Ti, Zn, Sn, Fe, and Cu in 1 N sulfuric acid and/or 1 N KOH. This group includes spontaneously passive, active-passive, and nonpassive metals. The apparent direct and indirect bandgaps and the flatband potentials were measured for the anodic oxides of each metal. (The bandgaps and flat-band potentials can be used to identify the anodic oXide.)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1981
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.30.6_366