Anodic Dissolution Mechanism of Fe-Mo Binary Alloys Using Channel Flow Multi-Electrode System in Acidic Sulfate Solution
نویسندگان
چکیده
منابع مشابه
Effect of Sodium Dodecyl Sulfate on Copper Anodic Dissolution in Phosphoric Acid Solution
In Electrochemical Mechanical Planarization process (ECMP), concentrated phosphoric acid is usually used as electrolyte. Role of sodium dodecyl sulfate (SDS) in anodic dissolution of Cu in concentrated phosphoric acid was studied by Cyclic Voltammetry (CV), inhibition efficiency (IE) calculation and in-situ observation of the Cu electrode surface at anodic overpotentials. It was found that pres...
متن کاملAnodic Oxidation of Methylene Blue Dye from Aqueous Solution Using SnO2 Electrode
This study was performed to investigate the electrochemical oxidation of a solution containing methylene blue dye by using a tin oxide (SnO2) electrode. The effect of several operating factors such as electrolyte types, current density, initial dye concentration, and pH were investigated by following the discolorationand COD removal. The results show th...
متن کاملInterdiffusion of Refractory Elements in Fe-Cr-X (X-Mo, W) and Fe-Mo-W Ternary Iron Alloys
Interdiffusion coefficients of the refractory elements in Fe-Cr-X (X 1⁄4 Mo, W) and Fe-Mo-W ternary alloys were measured on the basis of the modified Boltzmann-Matano method for ternary systems. The cross interdiffusion coefficient, ~ D CrW was positive in Fe-Cr-W ternary alloy, indicating that W accelerates interdiffusion between Fe and Cr atoms. On the other hand, the cross interdiffusion coe...
متن کاملHigh Magnetic Permeability Alloys Hardperm in the Ni-Fe-Ta-Mo System*
Starting materials used were 99.8% pure nickel, 99.9% pure iron, 99.9% pure tantalum, and 99.9% pure molybdenum. The materials in a total weight of 500g were melted with a high-frequency induction furnace in vacuum. The melt was poured into an iron mold with an opening of 20mm diameter and 150mm length. After forging, the ingot was reduced to a thin plate 0.3mm in thickness by rolling and a wir...
متن کاملMechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel
The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kagaku oyobi Kogyo Butsuri Kagaku
سال: 1997
ISSN: 0366-9297,2434-2556
DOI: 10.5796/kogyobutsurikagaku.65.580