Antenna Boosters versus Flexible Printed Circuit Antennas for IoT Devices
نویسندگان
چکیده
Antennas should be small enough to fit in the limited space of IoT devices and, at same time, with multi-band operation across several bands as well ensure stability when embedded a device. In this regard, two different technologies are compared: antenna booster and flexible printed circuit antenna. A comparison is addressed from measured results terms efficiency, concluding that despite more than fifty times smaller area, it provides better efficiency frequency range 698–960 MHz 1710–2690 three boards (PCB): big PCB 131 mm × 60 mm, medium 95 42 65 mm. Moreover, depends on mounting process, whereas does not.
منابع مشابه
Characteristics of a Deformed Antenna Made of Flexible Printed Circuit
In recent years, wireless communications, such as wireless LAN and Bluetooth, are widely spreading. As the antennas used in wireless communications are usually installed in small mobile devices, it is demanded that the volume to be small. To meet the miniaturization demand, we focussed our attention to flexible printed circuits (FPCs). FPCs have some attractive features such as thinness and fle...
متن کاملInkjet printed flexible antenna on textile for wearable applications
We report a direct write inkjet printing technique for fabricating a flexible antenna on textile for use in smart textile applications such as wearable systems (Rienzo et al. 2006). The complete antenna was deposited entirely using inkjet printing. The inkjet printed antenna is based on a half wavelength dipole antenna offering a planar structure and acceptable size. The printable silver nanopa...
متن کاملProcess Optimization for Flexible Printed Circuit Board Assembly Manufacturing
Copyright 2012 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...
متن کاملPrinted/additively Manufactured and Compact Antennas for Iot and Wearable Applications
To my father, mother, brother iv ACKNOWLEDGEMENTS I would like to express the deepest appreciation to my advisor, Dr. Manos Tentzeris, who has the attitude and the substance of a genius: he continually and convincingly conveyed a spirit of adventure in regard to research. Without his guidance and support this dissertation would not have been possible. I would like to thank my committee members,...
متن کاملA Small Printed Quadrifilar Helical Antenna for BGAN/GPS Applications
This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Signals
سال: 2022
ISSN: ['2624-6120']
DOI: https://doi.org/10.3390/signals3020021