Anti-wear Mechanism Analysis of Nano-CaCO3 Additives
نویسندگان
چکیده
منابع مشابه
Towards Phosphorus Free Ionic Liquid Anti-Wear Lubricant Additives
The development of improved anti-wear additives would enable the use of lower viscosity oils that would lead to improved efficiency. Ionic liquids have the potential to be this type of new anti-wear additive. However, currently the best performing ionic liquids that are miscible in non-polar base oils, the phosphonium phosphates, contain phosphorus on both the cation and anion. Manufacturers ar...
متن کاملStudy the effect of nano Al2O3 and nano graphene ceramic additives on the aircraft anti-icing/de-icing fluids
In the present study, the effect of nano Al2O3 and nano graphene ceramic additives in optimizing performance and improving thermophysical properties of aircraft anti-icing/de-icing fluids was investigated. Nanoparticles were characterized by TEM, SEM and XRD methods. The thermal conductivity, surface tension and dynamic viscosity of the hybrid nanofluids were experimentally assessed for tempera...
متن کاملFormation of Anti-Wear Tribofilms via α-ZrP Nanoplatelet as Lubricant Additives
Effective tribofilms are desirable to protect mechanical systems. In the present research, we investigated the formation of a tribofilm through the use of α-ZrP (Zr(HPO4)2 ̈H2O) as an additive. Experiments were conducted on a base oil where 0.2 wt% of the additive was used. Experimental results showed a 50% reduction in friction and a 30% reduction in wear when compared to the base oil containin...
متن کاملNano-scale Wear: A Review
The definition of wear has been proposed as a progressive loss of materials due to mechanical action of two bodies while in contact. Several researchers have also suggested the definition of wear as the progressive loss of substance from the operating surface of a body occurring as a result of relative motion against a solid, liquid or gaseous counter body at the surface. Thus, it can be stated...
متن کاملDelamination Wear Mechanism in Gray Cast Irons
An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2018
ISSN: 2267-1242
DOI: 10.1051/e3sconf/20183802018