Antisolvent engineering for mixed tin-lead inorganic perovskite solar cells
نویسندگان
چکیده
Recently, inorganic perovskite has been a research hotspot due to its thermal stability and promising photovoltaic performance. Here, we demonstrate the antisolvent engineering can assist fabrication of mixed tin-lead films. The treated devices exhibit enhanced in atmosphere air. champion solar cells (PSCs) with anisole exhibits power conversion efficiency 9.3% an open-circuit voltage over 0.8 V.
منابع مشابه
Mixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
In this work, a fully tin-based, mixed-organic-cation perovskite absorber (FA) x (MA)1-x SnI3 (FA = NH2CH = NH2+, MA = CH3NH3+) for lead-free perovskite solar cells (PSCs) with inverted structure is presented. By optimizing the ratio of FA and MA cations, a maximum power conversion efficiency of 8.12% is achieved for the (FA)0.75(MA)0.25SnI3-based device along with a high open-circuit voltage o...
متن کاملLead-free solid-state organic–inorganic halide perovskite solar cells
Lead-free solution-processed solid-state photovoltaic devices based on methylammonium tin iodide (CH3NH3SnI3) perovskite semiconductor as the light harvester are reported. Featuring an optical bandgap of 1.3 eV, the CH3NH3SnI3 perovskite material can be incorporated into devices with the organic hole-transport layer spiro-OMeTAD and show an absorption onset at 950 nm, which is significantly red...
متن کاملA mixed-cation lead mixed-halide perovskite absorber for tandem solar cells.
Metal halide perovskite photovoltaic cells could potentially boost the efficiency of commercial silicon photovoltaic modules from ∼20 toward 30% when used in tandem architectures. An optimum perovskite cell optical band gap of ~1.75 electron volts (eV) can be achieved by varying halide composition, but to date, such materials have had poor photostability and thermal stability. Here we present a...
متن کاملBication lead iodide 2D perovskite component to stabilize inorganic a-CsPbI3 perovskite phase for high-efficiency solar cells
Among various all-inorganic halide perovskites exhibiting better stability than organic-inorganic halide perovskites, a-CsPbI3with themost suitable band gap for tandem solar cell application faces an issue of phase instability under ambient conditions. We discovered that a small amount of two-dimensional (2D) EDAPbI4 perovskite containing the ethylenediamine (EDA) cation stabilizes the a-CsPbI3...
متن کاملCompact layer free mixed-cation lead mixed-halide perovskite solar cells.
Thickness-tunable and compact FA0.83Cs0.17Pb(I0.6Br0.4)3 perovskite thin films are achieved with a large grain size up to 12 microns. They are then employed to fabricate functional solar cells with a simplified planar structure without the use of electron-transport (ETL) layers. These results are highly encouraging for the future large-scale fabrication of FA0.83Cs0.17Pb(I0.6Br0.4)3-based solar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2021
ISSN: ['1742-6588', '1742-6596']
DOI: https://doi.org/10.1088/1742-6596/2011/1/012094