Applicability of Secondary Denitrification Measures on a Fluidized Bed Boiler
نویسندگان
چکیده
This article compares performance of selective catalytic reduction (SCR) and non-catalytic (SNCR) applied on the same pilot unit, a 500 kW fluidized bed boiler burning Czech lignite. Correlation denitrification efficiency normalized stoichiometric ratio (NSR) is investigated. The fundamental principle SCR SNCR similar with reaction scheme. difference in use catalyst that lowers activation energy key reaction. As result, performed method at lower temperatures. During experiments, NSR was up to 1.6 for method. For method, which has higher reducing agent consumption, maximum reached about 2.5. both secondary methods during experiments exceeded 98 % together primary measures, an 58 %.
منابع مشابه
Mass transfer studies on biological denitrification in fluidized bed bioreactor.
A fluidized bed bioreactor has been used to carry out biological denitrification in the present work as it offers many advantages over other types of reactors. Plastic beads of low density (1055 kg/m3) were used as fluidizing media with Pseudomonas stuzeri, a denitrifying microorganism immobilized on them. The denitrification rate under different operating conditions was studied. The results of...
متن کاملStudy on PIDNN control of circulating fluidized bed boiler based on T-S model
Temperature and pressure are two main parameters of CFBB in the control system. Because of the CFBB possess the characteristics of time-varying, large lag and strong coupling, it is difficult to set up the arithmetical model and achieve better control effects. According to above difficulties, this paper adopts T-S fuzzy modeling method to description the input-output relationship for the contro...
متن کاملControl of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملIdentification and MPC Control of a Circulation Fluidized Bed Boiler Using an LPV Model
This work studies the identification and control of circulation fluidized bed (CFB) boilers. The CFB boiler under investigation shows strong nonlinearity due to big changes of steam load. A linear parameter varying (LPV) model is used to represent the process dynamics and used in control. The steam flow is used as the working-point variable (scheduling variable) of LPV model. Multivariable plan...
متن کاملSpeciation of Copper in Ash from a Fluidized-Bed Boiler Fired with Municipal Solid Waste
Copper is one of the most important trace elements in municipal solid waste (MSW) combustion. Knowledge of the speciation of copper is fundamental for the understanding of the effects of copper compounds on the combustion chemistry, for the evaluation of the environmental effects of copper in ash leachates and for the development of methods to recover copper from the MSW combustion ash. In this...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Polytechnica
سال: 2022
ISSN: ['1210-2709', '1805-2363']
DOI: https://doi.org/10.14311/ap.2022.62.0341