Application of Biomass Pellets for Iron Ore Sintering
نویسندگان
چکیده
The use of biomass as fuel might solve several technological and environmental issues overcome certain challenges sinter production. In particular, revealed by comprehensive analyses, can be used for iron ore sintering. this study, we investigate the some raw pyrolysis-processed pellet types, namely wood, sunflower husks (SFH), straw, experiments, pyrolysis temperature was set to 673, 873, 1073, 1273 K, proportion in composition 25%. It established that addition biofuels sintering blend leads an increase gas permeability sintered layer. analysis complex characteristics process strength showed high potential wood husk pellets pyrolyzed at 1073 873 respectively, macrostructure samples obtained using biomaterials with higher temperatures; materials tend have greater sizes amounts pores cracks. analyses resultant sinters temperature, FeO content tends increase.
منابع مشابه
How to Measure Phase Distribution and Degree of Sintering in Iron Ore Pellets
Iron ore pellets are made from refined and ground ore that is balled into spheroids and then heat treated. Pellet properties are measured through standardized physical, chemical and metallurgical tests to guarantee a high quality end product. However to better understand the oxidation and sintering of iron ore pellets one has to study the microstructures. This paper provides a proof of concept ...
متن کاملMathematical Model For Energy Saving In Induration Of Iron Ore Pellets Containing Solid Fuel
Mathematical model for a pilot scale iron ore pellet induration furnace has been developed which considers the process of induration including the reactions of limestone, magnetite and coke. The differential equations of energy, mass and momentum are solved simultaneously. The profiles of temperature, pressure and concentration are obtained. Performing separate experiments on sub processes; dry...
متن کاملApplication of stochastic programming for iron ore quality control
Stockpiling and blending play a major role in maintaining the quantity and quality of the raw materials fed into processing plants, especially the cement, iron ore and steel making, and coal-fired power generation industries that usually require a much uniformed feed. Due to the variable nature of such materials, they even come from the same source and the produced ores or concentrates are seld...
متن کاملMicrowaves Applied to Carbothermic Reduction of Iron Ore Pellets
Results of reducibility tests of reduction conducted on iron ore pellets with carbon are presented in this work. Work done is centered on reduction kinetics using carbon as reducing agent with conventional heat supply (heat transfer process) compared with reduction kinetics where heat is supplied by microwaves to the whole volume. Ore used in this work is called "Alzada" which has reducibility ...
متن کاملAn Application of LFP Method for Sintering Ore Ratio
The proper ratio decision of sintering burden is a significant section for both of decreasing sintering costs and increasing quality of iron. At present most company in China take the Fixed-ratio method and linear programming (LP) model to calculate the proper ratio for sintering. The former is the performance appraisal method for production cost management of iron. The latter is to use maths m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 2021
ISSN: ['1422-6375', '0250-9776', '0255-5476', '1662-9752', '1662-9760']
DOI: https://doi.org/10.4028/www.scientific.net/msf.1045.17