Application of High Strength Steel to Composite Structures
نویسندگان
چکیده
منابع مشابه
Steel Concrete Composite Structures: State of Art
The aim of this review article is to examine solutions and challenges associated with composite construction. Structural steel and concrete, each of the two materials can be used to its best advantage and, therefore, composite structures have proved economical in terms of overall cost. Combination of steel and concrete systems has been conceived on the premises that each type of construction of...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملIntegrity of hybrid steel-to-composite joints for marine application
There are many instances where the use of weight-saving polymer composite material for an entire structure is either too complex, too expensive or unfeasible. In these circumstances the use of a hybrid structure can incorporate the benefits of traditional (e.g. steel ) construction coupled with the advantages of composite materials [e.g. glass-reinforced polymers, glass-reinforced plastic (GRP)...
متن کاملExperimental investigation of mechanical and dynamic impact properties of high strength cementitious composite containing micro steel and PP fibers
Cementitious composites are one of the most consumed construction materials in the world. The use of cementitious composites is increasing due to their special characteristics. The behavior of high strength cementitious composites is improved by increasing the fiber percentage. In the present paper, the effects of steel microfibers and polypropylene fibers on mechanical properties and impact re...
متن کاملImproved Material Models for High Strength Steel
The mechanical behaviour of the three advanced high strength steel grades, Docol 600DP, Docol 1200M and HyTens 1000, has been experimentally investigated under various types of deformation, and material models have been developed, which account for the experimentally observed behaviour. Two extensive experimental programmes have been conducted in this work. In the first, the dual phase Docol 60...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 1990
ISSN: 0387-1061
DOI: 10.3151/coj1975.28.11_5