Application of Low Molecular Weight Polyethylene “EXCEREX” Polymerized by Metallocene Catalyst for Polymer Processing

Synthesis of high molecular weight polyethylene using FI catalyst

A FI Zr-based catalyst of bis[N-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(IV) dichloride was prepared and used for polymerization of ethylene. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature up to 35 oC were favorable for catalyst/MAO to raise the catalytic activity as...

Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology

synthesis of high molecular weight polyethylene using fi catalyst

a fi zr-based catalyst of bis[n-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(iv) dichloride was prepared and used for polymerization of ethylene. the effects of reaction conditions on the polymerization were examined in detail. the increase in ethylene pressure and rise in polymerization temperature up to 35 oc were favorable for catalyst/mao to raise the catalytic activity as...

Branch Content of Metallocene Polyethylene

Small-angle neutron scattering (SANS) is employed to investigate the structure and longchain branch (LCB) content of metallocene-catalyzed polyethylene (PE). A novel scaling approach is applied to SANS data to determine themole fraction branch content (φbr) of LCBs in PE. The approach also provides the average number of branch sites per chain (nbr) and the average number of branch sites per min...

Grafting of Acrylamide to Low Density Polyethylene During Melt Processing

Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...