Application of PLC-Based Stroke Control in Industrial Production
نویسندگان
چکیده
منابع مشابه
Control of an Industrial Mixer using PLC
This paper is a design and implementation of a monitoring and control system for industrial mixer using PLC .This mixer used for an effective, reliable and highly flexible method for the control of processes within an Industrial environment. The objective of this study is to simulate the control an industrial mixer and by doing this we can develop a program that can be used for the actual imple...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولApplication of PLC for Elevator Control System
In this research paper an attempt has been made to integrate the programmable logic controller (PLC) with elevator for developing its control system. Thus, this paper describes the application of programmable logic controller for elevator control system. The PLC used for this project is GE FANUC with six inputs and four outputs. The programming language used is ladder diagram.
متن کاملPLC Application in the Control of CIAE-30 Cyclotron
Application of Programmable Logic Controller ( PLC ) brings CIAE-30 compact cyclotron into entirely automatic control, from cyclotron start-up until required beam current obtained at target can be performed with a single function key. The main parameters are sequentially set-up and regulated by PLC requiring no operators during routine production. High anti-interference ability, reliable safety...
متن کاملA Plc Based Mimo Pid Controller for Multivariable Industrial Processes
Abstract. Industrial processes are in general multi-input multi-output (MIMO) systems. Despite of that and because of the lack of good fine-tuning algorithms for MIMO controllers, they are usually treated as single-input single-output (SISO) ones for the purposes of control design and implementation. In that cases, the tuning procedure is frequently carried out taken one loop at a time and the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2021
ISSN: 1755-1315
DOI: 10.1088/1755-1315/632/4/042041