Application of superplastic titanium alloy for denture base. Part 1. Adaptability of the titanium alloy denture base.
نویسندگان
چکیده
منابع مشابه
[Mechanical studies on casting titanium alloy denture base].
The mechanical properties of the Akers type clasp, bar and frame made by the newly developed Ti-20Cr-0.2Si alloy were studied in order to obtain the indices for designing the cast partial denture base. In the case of the clasp, the bending strength of the Ti-20Cr-0.2Si alloy and pure Ti was lower than that of the Co-Cr alloy. The Ti-20Cr-0.2Si alloy and pure Ti may have the same retentive force...
متن کاملEffect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy
STATEMENT OF PROBLEM The poor chemical bonding of a denture base resin to cast titanium framework often introduces adhesive failure and increases microleakage. PURPOSE This study evaluated the shear bond strengths of a heat cure denture base resin to commercially pure titanium, Ti-6Al-4V alloy and a cobalt-chromium alloy using two adhesive primers. MATERIAL AND METHODS Disks of commercially...
متن کاملContemporary denture base resins: Part 1.
UNLABELLED Provision of partial and complete dentures constructed from resin is commonplace and a satisfactory outcome requires the consideration of the properties of the resin, the oral tissues and prosthodontic principles. Conventional acrylic resin has been widely adopted as a popular denture base material since the 1930s. In this first of a two-part series, the benefits and shortcomings of ...
متن کاملContemporary denture base resins: Part 2.
UNLABELLED Provision of partial and complete dentures constructed from resin is commonplace and a satisfactory outcome requires the consideration of the properties of the resin, the oral tissues and prosthodontic principles. This second of a two-part series examines the advantages and disadvantages of flexible nylon denture base resins, which have found popularity for the provision of partial d...
متن کاملColor and gloss evaluation of titanium dioxide coating for acrylic resin denture base.
PURPOSE We examined the clinical appearance (color, gloss, and surface roughness) of TiO(2) coating on polymethyl methacrylate (PMMA) resin dentures. METHODS A spraying method, using air brushes, was used to generate thin uniform TiO(2) coating. PMMA resin, primer-coated PMMA, and TiO(2)-coated PMMA (with primer) specimens were compared. RESULTS The Commission Internationale de l'Eclairage ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: THE JOURNAL OF THE STOMATOLOGICAL SOCIETY,JAPAN
سال: 1989
ISSN: 1884-5185,0300-9149
DOI: 10.5357/koubyou.56.429