Applying RANSAC Algorithm for Fitting Scanning Strips from Airborne Laser Scanning
نویسندگان
چکیده
منابع مشابه
Plane Fitting on Airborne Laser Scanning Data Using RANSAC
Model fitting refers to problem that computing the most ideal parameters of a model so that the model gives the greatest extent of coincidence with the data. The most widely used method for fitting data with Gaussian noises should be ordinary least squares. However, the ordinary least squares method treats each datum equally, which makes it unsuitable for fitting the data containing outliers. T...
متن کاملSurface Clustering from Airborne Laser Scanning Data
This paper presents an algorithm for the extraction of surface clusters from airborne laser data. Surface structure analysis is fundamental to almost any application involving LIDAR data, yet most algorithms focus only on identifying planar segments. The proposed algorithm is more general insofar as it aims at extracting surface segments that exhibit an homogeneous behavior, without restriction...
متن کاملPrinciples of airborne laser scanning
Figure 1 represents the paradigm of laser scanning. A paradigm as generally known focuses on the basics and ignores minor matters. The paradigm of laser scanning can be characterised in the following way: • A bundle of 3D-vectors, positioned by GPS and oriented by IMU • Active sensors Figure 2 illustrates the paradigm of Stereo-Photogrammetry and can be characterized by: • 2 directed bundles, w...
متن کاملApplying 3d Affine Transformation and Least Squares Matching for Airborne Laser Scanning Strips Adjustment without Gnss/imu Trajectory Data
In this article we extend our previous work on the topic of ALS strip adjustment without GNSS/IMU trajectory data. Between overlapping strip pairs the relative orientation as a 3D affine transformation is estimated by a 3D LSM approach, which uses interpolated 2.5D grid surface models of the strips and the entire strip overlap as one big LSM window. The LSM derived relative orientations of all ...
متن کاملAirborne Laser Scanning: Clustering in Raw Data
We implemented a strategy for terrain, vegetation and building detection, based on laser range data only. The result was obtained by working on raw data, so we were able to take advantage of the full resolution potential of laser scanning. The detection of objects was performed in two stages: first, elevated objects and ground are separated, and then the objects are classified as vegetation or ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil And Environmental Engineering Reports
سال: 2016
ISSN: 2450-8594,2080-5187
DOI: 10.1515/ceer-2016-0048