Arsenic ِAdsorption on Bauxite Mineral Using Batch Equilibrium Test
نویسندگان
چکیده
منابع مشابه
Leaching of Bauxite Residue with Mineral Acids
Aiming at the industrial scale development of a Scandium (Sc)-selective leaching process 14 of Bauxite Residue (BR), a sufficiently numerous set of process design aspects has been 15 investigated, by appropriate exploitation of available experimental data. The interpretation of 16 experimental data for Sc leaching yield, with sulfuric acid as the leaching solvent, has shown 17 significant impac...
متن کاملremoval of arsenic from aqueous solution using silica ceramic: adsorption kinetics and equilibrium studies
the removal of as(iii) ions from aqueous solutions has been investigated using silica ceramic under different experimental conditions of initial arsenite concentration, adsorbent dose, temperature and ph. better removal was obtained at temperature 25âºc and ph 7.5. the adsorption data have been explained in terms of langmuir and freundlich equations. the sorption kinetics was tested for the pse...
متن کاملArsenic (III) adsorption on iron acetate coated activated alumina: thermodynamic, kinetics and equilibrium approach
The adsorption potential of iron acetate coated activated alumina (IACAA) for removal of arsenic [As (III)] as arsenite by batch sorption technique is described. IACAA was characterized by XRD, FTIR, EDAX and SEM instruments. Percentage adsorption on IACAA was determined as a function of pH, contact time and adsorbent dose. The study revealed that the removal of As (III) was best achieved at pH...
متن کاملAdsorption Isotherms on Fluoride Removal: Batch Techniques
The ability of cynodon dactylon based thermally activated carbon to remove fluoride from aqueous solution has been investigated. The batch adsorption studies were carried out at neutral pH as the functions of contact time, adsorbent dose, adsorbate concentration, temperature and effect of co-anions, which are commonly present in water. The rate of adsorption was rapid during initial 105 minutes...
متن کاملBatch Adsorption From Solution
A batch adsorption equation was derived by integrating an irreversible rate equation obtained by neglecting the desorption term of the Langmuir adsorption-rate equation. The integrated equation was in reasonably good agreement with experiment and provided a means for determining from the data the parameters gQ and ku These constants, namely, the adsorptive capacity and the adsorption rate const...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Applied Sciences
سال: 2009
ISSN: 1546-9239
DOI: 10.3844/ajassp.2009.1826.1830