Assessing the electrical property of carbon nanotube reinforced oxide ceramic matrix composites produced by ceramic injection moulding
نویسندگان
چکیده
Owing to its remarkable properties, multiwalled carbon nanotubes (MWCNTs) are attracting the interest for realization of sensors. The potential MWCNTs high temperature sensing applications was investigated by integration within reinforced aluminium oxide ceramic composite. up 2 wt% were mixed with aluminum composite using solution mixing method ensure good homogeneilty powders. Specimens realized injection moulding process (CIM) followed debinding and sintering procedures. topography specimens examined atomic force microscopy (AFM). Electrical measurements also carried out. results show demouldability at concentration homogenous distribution matrix. AFM images illustrate reduction surface roughness increasing content which demonstrates role improve fracture resistance matrix As well, electrical feedstocks reduced sharply. After process, range drops enormously from M Ω reach 12.1 low content; make them suitable be as electrode capability. dependency shows a negative coefficient behaviour negligible change.
منابع مشابه
Carbon nanotube reinforced ceramic composites and their performance.
Carbon nanotubes are considered as excellent reinforcements for improving the properties of ceramic composites. This paper reviews the reported techniques for the preparation of various ceramic coated CNTs, CNT-ceramic composites, CNT-ceramic composite coatings, etc. It is noted that a wide range of techniques have been used to fabricate these composites. Their characterisation has revealed tha...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملWear of ceramic particle-reinforced metal-matrix composites
Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...
متن کاملThermal Property of Multi-Walled-Carbon-Nanotube Reinforced Epoxy Composites
In this study, epoxy composite specimens reinforced with multi-walled carbon nanotube filler were fabricated using shear mixer and ultra-sonication processor. The mechanical and thermal properties of the fabricated specimens were measured and evaluated. From the electron microscope images and the results from the measurements of tensile strengths, the specimens having 0.6 wt% nanotube content s...
متن کاملCeramic matrix composites containing carbon nanotubes: The story so far
Due to the remarkable physical and mechanical properties of individual, perfect carbon nanotubes (CNTs), they are considered to be one of the most promising new reinforcements for structural composites. Their impressive electrical and thermal properties also suggest opportunities for multifunctional applications. In the context of inorganic matrix composites, researchers have particularly focus...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Technologies for lightweight structures
سال: 2022
ISSN: ['2512-4587']
DOI: https://doi.org/10.21935/tls.v5i1.180