Assessment of concrete damage and strength degradation caused by reinforcement corrosion
نویسندگان
چکیده
منابع مشابه
Damage evaluation and corrosion detection in concrete by acoustic emission
Acoustic emission (AE) techniques have been extensively studied and applied to nondestructive testings (NDT) of concrete and concrete structures. For damage evaluation, AE behavior of concrete under compression could be analyzed, applying the rate process theory. Based on Loland's model in damage mechanics, a relation between AE rate and the damage parameter is correlated. By quantifying intact...
متن کاملBond of Reinforcement in High-Strength Concrete
This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...
متن کاملElectrochemical Assessment of Concrete Ternary Inhibitors Used in Retarding Corrosion of Steel Reinforcement
Corrosion of steel reinforcement in concrete is generally considered as an electrochemical process which reduces the service life of a structure exposed to chloride ions attack. Therefore, laboratory experiments were performed in order to ascertain the effectiveness and sustainability of ternary inhibitors (calcium nitrite, ethanolamine and eco-friendly green Bambusa Arundinacea) in protecting ...
متن کاملEmbedded Capacitor Sensor for Monitoring Corrosion of Reinforcement in Concrete
Corrosion of reinforcement can affect durability and integrity of reinforced concrete structures. Repair cost for a badly corroded structure can be very costly and time consuming. In this paper, several capacitor sensors were developed to monitor corrosion potential of reinforcement in concrete. The impedance capacitive of sensors was tested in various acid and alkali solutions using Agilent 42...
متن کاملPitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution
In this study, the pitting behaviour of a new corrosion-resistant alloy steel (CR) is compared to that of low-carbon steel (LC) in a simulated concrete pore solution with a chloride concentration of 5 mol/L. The electrochemical behaviour of the bars was characterised using linear polarisation resistance (LPR) and electrochemical impedance spectroscopy (EIS). The pitting profiles were detected b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2015
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/628/1/012050